I bought three Kafer dial gauges in an EBay job lot with a view to making a dual gauge holder as per Clough42’s design.
After some thought I realised that a single holder would suffice by just flipping the orientation of the dial gauge in the holder. Rather than machining the holder I opted to 3D print as this would be sufficiently robust when gripped in the QCTP of the Myford.
Here is the Fusion image and a picture of the finished holder in place. The gauge is gripped in place by two nylon screws. A M5 cap head screw acts as the height adjuster in the QCTP.
The threaded holes are all M5 and 3D modelled in the print. They just need a run through with a tap to clean then up.
The following link has a ZIP file containing the Fusion file and STEP file along with the dimensioning sketch for the QCTP geometry.
Similar or related subjects : –
- BK3 Burgess Bandsaw Fence Assembly
- Quorn cutter grinder tool holder support
- A 3D Printed Passive Demagnetiser using Neodymium magnets
- An alternative Bull’s Foot file for clock plate smoothing
- Adding thrust bearings to the Myford Super 7 with Clough42 ELS fitted
- Rear Parting Tool Post on Myford Super 7
- Myford Super 7 backlash solution with thrust bearings
- Adapter plate for a Tormach microARC to mount a Xin Dian centralising vice
- Laser cutting line modification to Femi NG120ABS bandsaw
- Milling vice stop for non grooved vice jaws