A handy reference for Fusion 360 parameter functions
Fusion 360 has an incredibly useful facility whereby you can make a model dimensions fully flexible through not entering fixed dimensions but instead make them a calculation. The calculation will be dependent on other attributes of the model in conjunction with mathematical functions.
Clough42 quite often uses this facility in his designs and there are some good tutorials in the Autodesk resources.
I had two problems in a recent model. The first one was where I had a dimension that I wanted to convert into a plain value rather than being associated with mm. This would allow it to be used in an equation. The second problem was needing to round a calculation result down to the nearest whole number.
The answer to the first problem was simple and obvious – divide the value in units by one unit. So something 200mm long becomes just plain old 200 when divided by 1mm. I was a bit red faced on that one.
On the second problem I searched everywhere in the Autodesk forums and found people mentioning ‘floor’ ‘ceil’ and ’round’ but it took a lot of searching to find a tabulated reference for the workings of the Parameter functions.
Having found the lookup details on the Autodesk site I have transcribed this into Woody speak which you can download as a pdf below and I have also added it to my Workshop Spreadsheet and there is a link to the latest version also below.
Links to similar or related post are listed below : –
- Creating Customised Threads in Fusion 360
- Automated 3D printed collet storage using Fusion 360 parameters
- Fusion 360 Keyboard Shortcuts
- Creating a worm drive in Fusion 360
- Fusion 360 Parameter Lookup Sheet
- Adding Colour Coding to Fusion 360 Assemblies
- Adding a logo to a Fusion 360 model
- Two important Fusion 360 Preferences tips
- 3Dconnexion Spacemouse has better Fusion 360 integration
- Try again after update completes Fusion 360 Error Message