The hard way and the easy way
A colleague asked if I could model a worm drive in Fusion 360 such that the result could be used to 3D print the worm and the associated wheel.
My first attempt was to create the assembly from first principles. This was painful and took a number of versions before I got a process that I could repeat and appeared to work. I was not happy that the result correctly reflected the dynamic shape needed on the wheel teeth.
Somewhat appropriately I then went down an internet worm hole and discovered there is a scripting plug in for Fusion 360 that allows the creation of these components. Not only that but the author Shwivel has also created a number of similar script routines for other gear related constructions.
The routines are chargeable (USD20 each) but given the time I spent try to do it the hard way, this seemed like a good price for what looked like a better result.
The script once downloaded appears as an icon in the Fusion top menu bar under the Shwivel tab.
Once opened it needs various parameters entering and allows entry of centre holes in each component. Once you’ve entered the parameter the script goes off and crutches the result. This can take a few minutes so patience is needed. The Dimensions section gives you all the values you have entered and the resulting parameters created.
I had a weird initial experience whereby the script entry window kept giving me red error messages no matter what measurements I entered. This was resolved by doing a RESET in the software FILE menu.
Here is my resulting design for a 60 tooth wheel.
While the routine allows the bore hole dimensions to be entered, I have found it easier to keep these to a small reference diameter hole and then revert to normal extrusion routines once the two main component shapes have been created.
Unlike a normal model, once you have created a model you cannot ‘right click’ in the timeline to edit it. Instead you have to click once again on the Shwivel top menu item and this gives you the entry screen for editing.
All in all I have been impressed by the results achieved but as yet I have not run any 3D printed models.
Links to similar or related post are listed below : –
- Creating Customised Threads in Fusion 360
- Automated 3D printed collet storage using Fusion 360 parameters
- Fusion 360 Keyboard Shortcuts
- Fusion 360 Parameter Lookup Sheet
- Adding Colour Coding to Fusion 360 Assemblies
- Adding a logo to a Fusion 360 model
- Two important Fusion 360 Preferences tips
- 3Dconnexion Spacemouse has better Fusion 360 integration
- Try again after update completes Fusion 360 Error Message
- Fusion 360 Electrical Personal Library tip