A minor post but it might help someone.
I had a need to run an armoured cable down a duct to an outbuilding. The duct had thoughtfully been installed a long time ago with the potential for use in the future.
The future arrived and it was a daunting cable run of over 25m. Armoured cable is pretty rigid which helps on the straight runs but when it comes to bends in the duct it had a mind of its own.
After struggling for some time I had the thought that some form of leader was needed to navigate the bends. After searching the workshop I decided a cable tie (zip tie) might be rigid enough but flexible enough. I snipped the fastener ratchet block from the tie and taped the residual length to the end of the cable as below.
A liberal coating of DC4 silicon grease and the cable shot down the duct and round the bends like a rat up a drainpipe.
Similar or related subjects : –
- Using Raaco section boxes for fastener storage
- Bamboo barbeque sticks as dowels
- Spreadsheet Compendium by Popular Request
- Spreadsheet for setting a lathe compound slide angle
- Shopping list spreadsheet that has other uses
- External battery pack to extend the battery life on wireless tags
- Tormach PCNC440 Z axis oil manifold access
- Having it and not needing it or Needing it and not having it ?
- Supply, IC2 and USB connections over CAT5 connection
- How to Register Velux radio controlled windows