Threads not quite to the design plan
The other day I modelled an adapter boss that had a threaded end to fit a standard CCTV camera mounting box (GB Pipe Thread – 26.441mm x 1.84mm tpi) and with the other end to suit a 20mm flexible conduit. Here is a Fusion pictorial view.
I modified the thread profile as per my post on thread tweaks and posted the file to Qidi Slicer. I opted to print in the orientation as shown above. This clearly needed support under the shoulder so without thinking I ticked the auto support tick box and hit print. The thread was a disaster flecks of filament such that it did not mate with the camera mounting box threaded hole.
Head scratching time, what had gone wrong ?
I had thoughtlessly just ticked autogenerate support and Qidi Slicer saw the thread profiles as potentially needing support and hence all the flash filament. Re-running with ‘support on build plate only’ removed the problem. See below.
This problem probably become more apparent due to the large size of the thread being modelled. Probably a dumb thing to have done but I tend to learn more from doing dumb things. One issue to be aware of in the future.
Links to similar or related post are listed below : –
- Qidi Slicer auto support error on my part
- Qidi X Smart 3 revised fan installation
- Qidi X Smart 3 tweaks
- Qidi X Smart 3 special weekend pricing
- Stop losing Qidi ifast 3D prints down the chamber front gap
- Fitting a Bento air filter to a Qidi ifast 3D printer
- 3D Printed Brass Threaded Insert Soldering Iron Stand
- eSUN filament reel silica drying pod
- Sindoh 3DWOX filament feed upgrade
- Sindoh DP200 conversion to Open Material
