Can’t Remember How to Square Up Material Stock ready for CNC ?
I sometimes have to dig deep in the odds and ends heap of rough bits of materials to use on a project. This results in having to square up the find so it can be easily programmed into Fusion CAM. I always have to scratch my head on the process which is well documented by Tom Lipton and This Old Tony among others. What I needed was something to pin on the wall to remind me.
The result of this frustration is a write up and a graphic which you may find useful. Here is a screenshot and the link below it provides both this document and the write up in a ZIP file.
Hope that helps and if it isn’t well explained let me know and if it was useful also let me know.
Similar or related subjects : –
- Plastic heat sealer – a useful workshop asset
- Deburring techniques in the home workshop
- First screw threads cut using Clough42 electronic leadscrew
- Machining a job that is outside a milling machine’s table travel using Fusion 360
- Stevenson Collet Block and the Angle of Dangle
- A Lazy Cable Clamp using 3D Printing
- Mill Turning Jig
- You say Vise and I say Vice but we agree that Clamps are Clamps
- Mill Turning on the Tormach PCNC440
- Sherline Motor Assembly for clock wheel cutting