Bondie Hacks is a YouTube site that I have on my YouTube listing and a recent video featured Quinn building a Kant clamp from a kit. Needing some lockdown distraction I decided that I would attempt to build a clamp from scratch. Searching on Google revealed a plethora of drawings and from these I distilled a plan of action.
I created a Fusion 360 assembly for my hybrid version. The clamp was made with 3mm steel side plates and the other fittings from various diameters of silver steel. From the Fusion drawings I created two CAM programs to profile the side plates and the other fittings were all straightforward lathe work with the exception of the gripping blocks. I made these in aluminium which I ran freehand on my manual mill. If the clamp is to be used for welding then it is traditional to make the clamps and the screw from copper.
I opted to fasten the side plates with screws and washers but the pillars could have been peened in place. This would have made replacement of the gripping jaws difficult however so screws seemed like a better option.
The result turned out very well and I was pleased that I had made the effort.
I have produced engineering drawings on Fusion previously but all were a bit ad hoc. Fusion is capable of automating the process of creating drawings for each component but I had never got to grips with it. Having created the clamp I decided it was a good excuse to dig deeper into the drawing process.
There are various YouTube videos on creating Fusion engineering drawings but the one that helped the most was by Bryce at Autodesk. The key to the automation process is creating Templates. This is really worth watching if you are debating moving up a level with the quality of your engineering drawings.
The video goes into detail on how to create a customised set of drawing sheet blanks with customised title blocks. Having watched this a couple of times the mists began to clear.
The result of my labours is the complete drawing set for my Kant clamp in the following pdf file. Feel free to download and build your own.
Similar or related subjects : –
- Fusion 360 Electrical Personal Library tip
- Jerky Mouse Effects with 3D Connexion SpaceMouse and CadMouse used together
- 3DConnexions Spacemouse joins the workshop
- Tormach MicroArc and Fusion 360 and 4th Axis
- Fusion 360 Speeds and Feeds
- Golf Caddy Locks and Ring Lights
- Tormach Post Processor G53 Edits for Tool Change
- A Parallels Rack in Fusion and Sindoh with free Spagetti
- Shumatech DRO350 Experiences and Fixes